Juniper Junos Automation
26 configuration generators with NETCONF API push
Switching & VLAN
VLAN Generator
Generate VLANs, Vlan-tagging, and trunk port configurations for EX series.
Bulk VLAN Deploy
Rapid deployment of multiple VLANs across multiple switches.
Interface Config
Bulk interface configuration with IP addresses, descriptions, and security.
IRB Interfaces
Integrated Routing and Bridging interface configurations.
Security & NAT
Firewall Filter
Generate firewall filters for port security, DDoS protection, and access control.
NAT Generator
Source NAT, Destination NAT, and NAT pool configurations for SRX firewalls.
Zone Policy
Security zones and policies for trust/untrust segmentation on SRX Series.
802.1X Auth
Port-based network access control with RADIUS for EX series switches.
Routing
BGP Config
Peer groups, prefix lists, route policies, and BGP routing for ISP connections.
OSPF Config
Area configurations, interfaces, and OSPF routing policies.
Static Routes
Generate static routes with BFD, preference, and routing instance configurations.
VRF/L3VPN
VRF routing instances for customer segregation and L3VPN configurations.
VPN & QoS
IPSec VPN
Route-based IPSec VPNs with IKE proposals, crypto maps, and st0 interfaces.
MPLS
MPLS configuration with LDP, RSVP, and LSP tunnel setup.
QoS / CoS
Class-of-service, schedulers, policers, and traffic shaping configurations.
Class of Service
Forwarding classes, scheduler maps, and priority queuing.
Management & Monitoring
DHCP Server
DHCP pools, bindings, options, and relay configurations.
SNMP Config
SNMPv2c/v3 configurations, communities, and trap groups.
Logging & Syslog
Syslog servers, logging levels, and traceoptions for troubleshooting.
System Config
Host name, time zone, NTP, syslog, and services configuration.
STP Config
Spanning Tree Protocol with RSTP, MSTP, and port roles.
LLDP Config
Link Layer Discovery Protocol for neighbor discovery.